Today, honing operations have taken on a new dimension of accuracy and precision. For example, in double head honing – the honing sticks far exceed the 0.0002- to 0.0003-inch tolerances of conventional honing machines, and it takes that 1 micron of stock off both sides simultaneously within 4 to 5 minutes. The result is a new level of flatness and concentricity not previously obtainable.
However, the loading of honing sticks and stones with dirt smoothens the honing edges. Thus, the sticks move inside the components without doing anything. This action of stick movement results in wasted effort and resources.
We solve the following problems with our oil filtration systems for honing machines-
- Our primary aim is to provide crystal clean honing oil at the point of honing. This crystal clean honing oil reduces the loading of sticks and stones and keeps the honing edges active.
- Our system design philosophy is to avoid scrap generation of the filtration system. Thus our honing oil filtration system does not require frequent media changes.
- The crystal-clear oil helps cutting tool manufacturers achieve optimum surface finish values and tolerances.
Transor‘s Honing Oil Filtration System for Cast Iron is working very well at Godrej & Boyce, Mohali, and the configuration is highly recommended for this application.