Micropure- Edge filtration system
Micropure is a fine filtration system for cutting oils. It works on the principle of edge filtration i.e. fine dirt particles in oil are trapped at the edge of the filter element and are automatically cleaned by dry compressed air. Because of the self-cleaning feature, these elements can be used for at least 1 year without replacement.
Oil filtration system for steel honing
Oil filtration system for aluminum grinding
Oil filtration system for tool grinding machines like ANCA, Walters, TGT, Widma etc.
Oil filtration system for EDM application
No consumable filter elements- The filter elements which come with the system last for at least 1 year of usage. In applications like EDM oil, aluminum grinding and some carbide grinding applications, customers have not changed the elements for more than 2 years.
Environmental impact- Even if the elements last for 2 years, they will have to be replaced. At the time of replacement, we take back the used elements and send new ones. Thus reducing the disposal efforts and costs.
Fully automatic self-cleaning (backwashing)- All our systems come with PLC controlled panels and air actuated valves. Thus the system once installed need not be attended to by anyone.
Uninterrupted full flow filtration- The systems are designed so that it gives desired or higher oil flow rate for the entire lifetime of the elements
Low consumption of compressed air- Compressed air is required only for backwashing of the elements which happens for only 4 minutes.
Modular design- Modules of filtration systems can be added as and when required instead of installing a centralized system.
Small operational oil volume- The filtration systems are engineered to run on minimum oil volume possible, thus reducing the overall operational cost.
Automated sludge removal- Micropure filtration systems can be equipped with automated removal of backwashed dirt particles.
Filtration capacities- 20 lit/min to 1500 lit/min and more
Filtration efficiency- 3 micron (nominal)